|
||||
|
Home | Products | Downloads | Contact | | |||
|
|
||||
| Application Guide to TechLube® - HD Prelube Bag Cable Pulling Lubricant |
| 1. Attach Prelube Bag(s) to the winch rope in front of the pulling eye cable. Fasten with electrical tape or wire behind the bag's metal clip. (Use more bags on difficult pulls over longer runs, with multiple bends.) |
 |
2. Start the pull, guide the bag(s) into the conduit, slitting open the entire length of the bag(s) using a cutting tool just as each bag enters the conduit. |
 |
3. The opened Prelube Bag(s) will deposit lubricant inside the conduit as it is being pulled through. |
 |
4. Pull until all of the bag(s) is exposed from the conduit. Remove empty bag(s) from winch line. (The cable should also be lubricated directly as it enters the conduit with TECHLUBE® HD by pouring, pumping or applying by hand.) |
 |
5. Dispose of the empty Prelube Bag(s) according to Federal, State and Local regulations after use. |
 |