| Application Guide to
PF® Cable Cleaning Kit |
| 1. After the cable is cutback, abrade the primary insulation with
enclosed non-conductive, aluminum oxide, abrasive cloth to remove any imbedded semi-con and conductive particles. |
 |
| 2. Open the wet side of a PF®
Solvent Wet/Dry Wipe. Wipe the length of the exposed cutback area to remove all of the
contaminants and aluminum oxide particles. Then open the dry side of the PF®
Solvent Wet/Dry Wipe and wipe dry the exposed cut back area. |
 |
| 3. Open the wet side of another PF®
Solvent Wet/Dry Wipe and remove all the remaining semi-con and conductive particles
on the primary insulation by wiping from the insulation edge back toward the semi-conductive
shield. Finally, open the dry side of the PF® Solvent Wet/Dry Wipe and wipe the primary
insulation dry. |
 |
| 4. Open the LPS®
WorkPlace Hand Cleaner Towel to clean, protect and remove residue from your hands. |
