| Application Guide to
PF® 200 Cable Cleaner |
| 1. After the cable is cutback, abrade the primary insulation with
non-conductive, aluminum oxide, abrasive cloth to remove any imbedded semi-con and conductive particles. |
 |
| 2. Apply PF®-200 Cable Cleaner to a clean lint-free cloth and
wipe the length of the exposed cutback area to remove
contaminants. Wipe the cleaned area dry with a lint-free cloth. |
 |
| 3. Apply PF®-200 Cable Cleaner to a clean lint-free cloth and
remove all the remaining semi-conductive and conductive particles on the primary insulation by wiping from the
insulation edge back toward the semi-conductive shield. Wipe the primary insulation dry with a lint-free cloth. |
 |
